|
Pair of Faux Leather Car Bucket Seats in Pink & Black Features: - New 2010 Design
- Suitable for most types of car
- Adjustable tilt control mechanism to allow for access to rear seats in 2/3 door cars
- Slide forward / backward mechanism to allow for driver height adjustment
- Made from "faux" (imitation) leather
- Universal fitment brackets
- Includes harness holes
- Choice of 8 colour combinations - Blue & Black, Red & Black, Grey & Black, All Black, Pink & Black, Yellow & Black, White & Black, All White. See our other items for the other colours available. We also have the seats available in a fabric finish.
- This price is for a PAIR of these excellent quality seats!
Please note: We operate a "pre order" system on a first come first served basis with these seats. If the colour combination you require from the list above is NOT currently available please email us your telephone number and the colour combination you require and we will phone you as soon as that colour combination comes back in stock. You will then be given first refusal on the seats before they are listed for general sale. Please note that it can take up to 60 days between deliveries, and are are not able to offer combinations other than those shown above. Sizes: We can not tell you if these seats will fit in your specific car, they are of an average size and should fit most cars, if you are unsure as to whether these will fit your car please see the dimensions below. The manufacturer doesn't specify the dimensions of these chairs although we have measured them and provided approximate dimensions below, these are measurements taken at the widest point of the seat: 
Further Dimensions: Runners - The runners are found to the base of the seat, and allow the seats to slide backwards and forwards depending on the drivers leg length. There is two runners on the base of each seat, each runner is 32cm long, and 3.7cm wide. The runners run down the length of the seat front to back, and are parallel to each other. They are 44.5cm apart when measured from the outside of each runner, or 40cm when measured from the center of the holes which can be found on each runner. Each runner has two holes in it, which are approximately 27cm apart. Seat Base - The seat base is the part of the seat where your bottom goes. As these are "bucket seats" the sides of the seat go up your thigh to "hug" you, and hold you in position around the corners. The flat part of the base is 32cm wide, rising to approximately 45cm at the tops of the supports. Seat Back - The seat back is the part of the seat where your back goes. Again, the seat back is designed to "hug" you, and hold you in position around the corners. The flat part of the back is 30cm wide, rising to 43cm to the tops of the supports. Fittings: These chairs come with a universal fitting bracket to the base of the chair, as with the sizes we can not guarantee that these will fit straight into your car & some modification may be necessary, occasionally you will need to purchase a "sub frame" to fix the seats correctly. We do not sell the sub frames ourselves, if you do need sub frames we recommend you purchase "car specific" sub frames. These should be much easier to fit than the generic sub frames which will fit a number of cars. The largest range of sub frames to fit these seats is provided by "Sparco". There's plenty of companies, both internet based and "Bricks & Mortar" based that sell these sub frames and should be able to advise you about fitting the seats to your car. Just run a search on google for "Sparco Sub Frames". For safety reasons we advise you to have the seats professionally fitted. Colours This item is available in a number of different colours. This item is the Pink & Black seats, please see our other items for the other colours available. We also have this seat available in a fabric finish instead of faux leather. 
Here the seats are shown in the fully reclined position 
Here the seats are shown in the tilted forward position which allows access to rear seats in 3 door cars! 
The seats have a lever on the side of the chair which can be used to tilt the seats forward, or recline them backwards, as shown in the picture above. 
The second lever on the seats is found to the front of the seat, and allows the seats to "slide" backwards and forwards on the included runners. 
A shot of the sliding mechanism to the base of the chair.
|
Camping
